Specifications; Get Started; Battery Installation; Set The Unit Measurement - Smart Weigh SW-SBS500 Manual Del Usuario

Specifications

Weight Capacity 440 lbs / 200 kg / 31 st: 6 lbs�
Weight Unit kg / lb / st: lb
Weight Graduation 0�1 kg / 0�2 lb / 0�2 lb (st)
Body Fat Graduation 0�1%
Height Range 3ft 3�5 inches – 7ft 2�5 inches (100 – 220 cm)
Age Range 10 or older
Measurements Weight, BMI, body fat, water, muscle, bone
Users 8
Batteries 2 x CR2032 lithium batteries
The Smart Weigh Body Scale uses Bio Impedance Analysis (BIA) technology which sends a low-level
electrical current through the body to calculate body fat, body water, muscle mass, and bone mass� The
electrical current is mild and may not be felt� Contact is made through the stainless steel bars on the scale
platform�
The information provided by this device is not meant to treat, cure, or prevent any disease or illness� This
device should not be used by anyone who is acutely or chronically ill, suffering from a disease, or taking
medication that affects your water levels� The accuracy for such patients has not been verified� Specific
medical advice should be obtained from a physician�
This scale is not intended for use by pregnant women or children under the age of 10� It should not be
used by anyone with an implanted medical device (pacemaker, metal plates or screws, or contraceptive
devices)� If in doubt, contact your physician�

Get Started

Remove the plastic strip from the battery compartment before using the scale� Your scale will not work
before that is removed� This strip is placed to protect from accidental activation during shipping�

Battery Installation

Replace the batteries with two CR2032 lithium batteries observing the correct polarity when the LCD
displays Lo�
Use a small tool to remove the battteries when neccasary�

Set the Unit Measurement

Once the scale is on, press the button on the bottom of the scale to select the desired unit measurement�
Set the scale for kilograms (kg), stones (st/lb), or pounds (lb)�
The scale needs to be initialized before the first use and after battery replacement�
Press firmly on the scale platform�
The display will show a running zeroes pattern and automatically turn off�
Your scale is now ready for use�
Note: bare feet are required for the scale to function properly�
4
Product Manual