Setting The Sensitivity Of Station Seek Tuning; Storing Stations; Listening To Stored Stations - Blaupunkt Daytona MP28 Instrucciones De Manejo

Radio mode
Tuning into stations manually
You can also tune into stations manually.
To change the set frequency in small incre-
ments,
u
briefl y press the
repeatedly until the desired frequency
is set.
Setting the sensitivity of station
seek tuning
You can choose whether the radio should
only tune into stations providing good re-
ception or whether it can also tune into
those with a weak reception.
u Press the MENU button 3.
u
Press the or
until "SENS HIGH" or "SENS LOW" ap-
pears on the display.
u
Set the desired sensitivity with the
? or button @.
When you have fi nished making your chang-
es,
u press the MENU button 3 or wait
5 seconds.
The settings are saved.

Storing stations

Storing stations manually
u
Select the desired memory bank FM1,
FM2, FMT or AM waveband.
u
Tune into the desired station.
u
Press and hold down one of the station
buttons 1 - 6 = for longer than 2 sec-
onds to assign the station to that but-
ton.
The settings are saved.
14
? or button @
button 2 repeatedly
Storing stations automatically
(Travelstore)
You can automatically store the six sta-
tions offering the strongest reception in the
region (FM only). The stations are stored
in the FMT memory bank.
Note:
Any stations that were previously
stored in this memory bank are deleted
in the process.
u Briefl y press the TS button 9.
The storing procedure begins. "FM TSTORE"
appears on the display. After the process
has completed, the radio will play the sta-
tion that is stored under station button 1 of
the FMT memory bank.

Listening to stored stations

u
Select the desired memory bank or
waveband with the BAND button >.
u
Press one of the station buttons
1 - 6 =.
The stored station is played if it can be
received.