Tips for the user
General information
The device may have the following status:
- ON: the device is connected to the electric power supply and switched on by
the ON/OFF switch. You can set the temperature with the temperature control.
- Standby: the device is connected to the electric power supply, but has been
switched off by the program, the temperature control is off.
- OFF: the device is not connected to the electric power supply.
Switch on/switch off the device
•
Connect the device to the socket installed according to the legal requirements.
•
Switch the device on with the ON/OFF switch located on the front of the device.
The operation control light (green), integrated with the switch, will glow.
•
Make sure that the digital temperature control buttons are not blocked and
none of the processes (defrosting, cooling, etc.) is in progress.
•
Press and hold the button
mode of the device starts. The LED
mode.
•
To change the mode to the ON mode, again press and hold the button
for 4 seconds.
Display
When the device is on, at the normal operation of the device, the interior temperature is
displayed, except defrosting when the display shows "dEF".
When the device is switched off with the ON/OFF switch the display is off as well.
When the device is in a "snooze" mode the LED
- 42 -
for 4 seconds. The LED
remains glowing when the device is in that
glows.
blinks and the Standby