Bartscher 590LW Instrucciones De Uso página 47

Automatic defrosting
Defrosting of the device is performer automatically by water evaporation.
At the default setting, the automatic defrosting is performed every 6 hours. The first
defrosting circle starts when you switch on the device for the first time.
Defrosting lasts 20 minutes. The next defrosting circle starts after 6 hours.
Activation of manual defrosting
1. Make sure that the buttons are not blocked and none of the processes is in progress.
2.
Press and hold the button
immediately. The defrosting LED indicator
defrosting has finished. The next defrosting process starts 6 hours after the end of the
previous defrosting.
Blocking / unblocking buttons
Blocking the buttons:
1. Make sure that none of the processes is in progress.
2.
Do not perform any setting during 30 seconds: the message "Loc" appears
for 1 second on the display and the control panel buttons are blocked automatically.
When the control panel buttons are blocked the following functions are not available:
- switch ON/OFF the device
- indicate the temperature measured by the probe
- activate the manual defrosting
- set the working temperature
When you try to introduce a setting, the message "Loc" appears for 1 second
on the display. Unblock the buttons before you start introducing a setting.
3.
To unblock the buttons, press and hold for 2 seconds one of the buttons.
The message "UnL" appears for 1 second on the display.
Modify/set required temperature
1. Make sure that the buttons are unblocked and none of the processes is in progress.
2. Briefly press the button
3.
In 15 seconds briefly press the button
The parameters r1 (min. temperature) and r2 (max. temperature) appear on the
display.
for 5 seconds. Defrosting shall be activated
glows and remains glowing until the
, LED blinks.
or button .
- 43 -