Parts Description - Dolmar HT-CS 2 Manual De Instrucciones

—
Place of the accident
— What happened
—
—
— Your name

PARTS DESCRIPTION

Fig.3
1 2 Gear case
ASSEMBLY
WARNING:
switch off the motor and remove the spark plug cap or the bat-
tery cartridge. Otherwise blades or other parts may move and
WARNING:
Before handling or working around blades,
wear protective gloves and put the blade cover onto blades.
Otherwise the blades can cut bare hands severely.
WARNING:
WARNING:
Follow the warnings and precautions in the
chapter "Safety precautions" and the instruction manual of the
power unit.
Mounting the attachment to a power unit
1.
2.
3.
4.
shaft.
Fig.4: 1. Lock lever 2.
5. Release button
NOTICE:
Do not tighten the lock lever without the shaft of the
OPERATION
WARNING:
of the engine down. Otherwise you cannot stop the blades with
WARNING:
Follow the warnings and precautions in the
chapter "IMPORTANT SAFETY INSTRUCTIONS" and the
instruction manual of the power unit.
Horizontal cut
1.
2.
3.
Fig.5
Vertical cut
1.
2.
3.
movement.
Fig.6
3 4
3. Arrow mark 4.
MAINTENANCE
WARNING:
Before inspecting or maintaining the equip-
ment, switch off the motor and remove the spark plug cap or
the battery cartridge. Otherwise blades or other parts may
WARNING:
Before handling or working around blades,
wear protective gloves and put the blade cover onto blades.
WARNING:
When inspecting or maintaining the equipment,
the equipment in an upright position may result in serious
WARNING:
Follow the warnings and precautions in the
chapter "IMPORTANT SAFETY INSTRUCTIONS" and the
instruction manual of the power unit.
Inspecting blades
the clearance as follows.
Loosen the nuts with a wrench.
1.
2.
3.
4.
5.
6.
7.
Fig.7: 1. Nut 2. Hex bolt 3.
6.
Lubricating moving parts
NOTICE:
Fig.8
Gear case:
1.
lubricate.
2.
3. Return the bolt after lubrication.
Fig.9: 1. Grease hole
NOTE:
Drive axle:
Overall inspection
6 ENGLISH
4. 5.