Technical Data - Hilti SFC22-A Manual De Instrucciones

Designation
Battery
Belt hook (optional)
Designation
Keyless chuck clamping range ∅ 1.5...13 mm
Drilling diameter range in wood
(soft)
Drilling diameter range in wood
(hard)
Drilling diameter range in metal ∅ 1.5...10 mm
Wood screws (max. length 80
mm)
Driving screws in plastic an-
chors (max. length 120 mm)

4 Technical data

Right of technical changes reserved.
Power tool
Rated voltage (DC
voltage)
Weight in accord-
ance with EPTA
procedure 01/2003
Dimensions (L x
W x H with B
14/1.6 or B 22/1.6)
1st gear speed
(with B 14/3.3 or
B 22/2.6)
2nd gear speed
(with B 14/3.3 or B
22/2.6)
Torque with tool
set to drilling sym-
bol (soft/flexible
joint)
Torque range (15
settings)
NOTE
The vibration emission level given in this information sheet has
been measured in accordance with a standardized test given in EN
60745 and may be used to compare one tool with another. It may
be used for a preliminary assessment of exposure. The declared
vibration emission level represents the main applications of the
tool. However if the tool is used for different applications, with
different accessories or poorly maintained, the vibration emission
may differ. This may significantly increase the exposure level over
the total working period. An estimation of the level of exposure
to vibration should also take into account the times when the tool
is switched off or when it is running but not actually doing the
job. This may significantly reduce the exposure level over the total
working period. Identify additional safety measures to protect the
operator from the effects of vibration such as: maintain the tool
and the accessories, keep the hands warm, organization of work
patterns.
Noise and vibration information (measured in accordance
with EN 60745):
Typical A-weighted sound
power level for the SFC 22-A
Typical A-weighted sound
power level for the SFC 14-A
Typical A-weighted emission
sound pressure level for the
SFC 22-A.
Printed: 05.09.2013 | Doc-Nr: PUB / 5071588 / 000 / 01
Short designation
B 14/3.3 Li­Ion
Description
∅ 1.5...20 mm
∅ 1.5...12 mm
∅ 3...6 mm
∅ Max. 8 mm
SFC 14­A
14.4 V
1.5 kg
192 mm x 80 mm x
225 mm
0...500/min
0...1,700/min
Max. 24 Nm
1.5...10 Nm
80 dB (A)
80 dB (A)
69 dB (A)
SFC 22­A
21.6 V
1.7 kg
202 mm x 92 mm x
234 mm
0...600/min
0...1,800/min
Max. 28 Nm
1.5...10 Nm
en
19