Makita HM1801 Manual De Instrucciones página 7

Lubrication (Fig. 9 & 10)
This tool requires no hourly or daily lubrication because it
has a greasepacked lubrication system. It should be relu-
bricated after every 6 months of operation. Send the com-
plete tool to Makita Authorized or Factory Service Center
for this lubrication service. However, if circumstances
require that you should lubricate it by yourself, proceed as
follows.
First, switch off and unplug the tool.
Remove the cap using a wrench 23, then replenish with
fresh grease (60 g). Use only Makita genuine hammer
grease (optional accessory). Filling with more than the
specified amount of grease (approx. 60 g) can cause
faulty hammering action or tool failure. Fill only with the
specified amount of grease.
Reinstall the cap and secure with the wrench.
To maintain product SAFETY and RELIABILITY, repairs,
any other maintenance or adjustment should be per-
formed by Makita Authorized Service Centers, always
using Makita replacement parts.
ACCESSORIES
CAUTION:
• These accessories or attachments are recommended
for use with your Makita tool specified in this manual.
The use of any other accessories or attachments might
present a risk of injury to persons. Only use accessory
or attachment for its stated purpose.
If you need any assistance for more details regarding
these accessories, ask your local Makita service center.
• Bull point
• Cold chisel
• Scaling chisel
• Clay spade
• Rammer
• Safety goggles
• Hammer grease
• Hex wrench
• Wrench 23
7