Weighing Using Known Tares - Avery Berkel FX 50 Instrucciones De Usuario

FX50_User.book Page 28 Thursday, August 23, 2007 2:31 PM
4. Operating the scale
N
NOTE: You can change the unit price that the scale has saved. To do
this, retype the price and the scale will save the new unit price until you
press the
4.5

Weighing using known tares

N
NOTE: This function is for the USA and Canada variant only.
If you know the weight of an item such as a food container or wrapping that
you use to contain or pack items on the scale and you want to use this as a
tare weight, you can manually enter the tare weight into the scale. The scale
deducts the weight of the tare item from the total gross weight and displays
the net weight and the total price of the item only.
N
NOTE: When you have entered a tare weight the scale displays a
minus figure in the weight display to represent the tare weight.
N
NOTE: At step 6 you can manually enter the unit price of the item or
you can recall the item price using either a direct PLU or an indirect
PLU. See Sections 4.9 - 4.12 for information about PLUs.
To enter a tare weight that you know and then weigh an item that has the
same tare weight do the steps as follows:
28
key to cancel it.
Fig 4-4. Weighing using known tares
FX 50 User Instructions