About The Power Cord Support Bracket; Maintenance - Esoteric S-02 Manual Del Usuario

o Do not move the unit during use.
o Do not open the body of the unit as doing so might result in
damage to the circuitry or cause electric shock. If a foreign object
should get into the unit, contact your dealer.
o When removing the power plug from an outlet, always pull
directly on the plug. Never pull on the cord itself.
Note about pinpoint feet
High-precision metal pinpoint feet are attached firmly to the bottom
plate of this unit.
The stands for these feet are loose, but when the unit is placed in
position, it is supported by these pinpoint feet, which will effectively
disperse vibrations.
Chassis
Foot-stand (metal)
o Apply the included felt to the bottom of the foot-stands to avoid
scratching the surface where the unit is placed.

About the power cord support bracket

This unit includes a bracket to support heavy power cords, such as
the ESOTERIC 7N-PC9500 MEXCEL and 7N-PC7500 and 7N-PC5500
power cords.
Align it with the power cord being used and attach it, tightening the
screws securely.
Power inlet
Pinpoint foot (metal)
Screws that attach
foot-stand
Power cord
Bracket
Screw

Maintenance

Use a soft dry cloth to wipe the surface of the unit clean.
For stubborn smudges, use a damp cloth that has been thoroughly
wrung out to remove excess moisture.
V For safety, disconnect the power plug from the out-
let before wiping the unit.
o Never spray liquid directly on these units.
o Do not use chemically-treated wipes, thinner or similar substances
because they could damage the surface of the unit.
o Avoid allowing rubber or plastic materials to touch the unit for
long periods of time, because they could damage the cabinet.
7