Kenwood KDC-PS907 Manual De Instrucciones página 39

The following messages are displayed when certain problems are occurring in your system. Take the recommended
actions.
No disc magazine has been loaded in the changer. The disc magazine is not completely loaded.
EJECT
]
Load the disc magazine properly.
No disc has been loaded in the disc magazine.
NO DISC
]
Load a disc into the disc magazine.
No disc has been loaded in the disc magazine.
E-04
]
Load a disc into the disc magazine.
The CD is quite dirty. The CD is upside-down. The CD is scratched a lot.
]
Clean the CD and load it correctly.
Nothing has been recorded on the MD.
BLANK
]
The next MD will automatically be played.
No tracks are recorded on the MD, although it has a title.
NO TRACK
]
The next MD will automatically be played.
The unit is malfunctioning for some reason.
E-77
]
Press the RESET button on the unit. If the "E- 77", "E- 99" code does not disappear, consult your nearest service center.
E-99
The protective circuit in the unit activates when the temperature inside the automatic disc changer exceeds 60°C (140°F), stopping
HOLD
all operation.
]
Cool down the unit by opening the windows or turning on the air conditioner. As the temperature falls below 60°C (140°F), the
disc will start playing again.
39