Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
A system error
Send in the device immediately for repair. Do not perform any more welding!
Interruption
Interruption of the welding voltage occurred during welding.
The welding voltage is faulty
The welding voltage moved outside the permissible range during welding.
9
The read out and management programme RODATA 2.0
The read out software as well as the installation and operating manual for the software can be
found on the USB stick supplied. The software can also be downloaded if necessary from the
homepage www.rothenberger.com.
10
Maintenance
According to DVS 2208 Part 1, repeat checking (maintenance) should be undertaken at least
once a year.
11
Accessories
Accessory Name
Barcode scanner
Plug 4.0 mm
Plug 4.7 mm
12
Customer service
The ROTHENBERGER service locations are available to help you (see listing in catalog or on-
line) and replacement parts and service are also available through these same service locations.
Order your accessories and spare parts from your specialist retailer or using our service-after-
sales hotline:
Phone:
+ 49 (0) 61 95 / 800 – 8200
Fax:
+ 49 (0) 61 95 / 800 – 7491
Email:
service@rothenberger.com
www.rothenberger.com
13
Disposal
Components of the unit are recyclable material and should be put to recycling. For this purpose
registered and certified recycling companies are available. For an environmental friendly dispos-
al of the non-recyclable parts (e.g. electronic waste) please contact your local waste disposal
authority.
For EU countries only:
Do not dispose electric tools with domestic waste. In accordance with the European
Directive 2012/19/EC the disposal of electrical and electronic equipment and its im-
plementation as national law, electric tools that are no longer serviceable must be
collected separately and utilised for environmentally compatible recycling.
30
ROTHENBERGER Part Number
No. 1500001316
No. 1500001317
No. 1500001318
ENGLISH
Publicidad
Capítulos
Tabla de contenido
