Warewasher Controls - Classeq P500 Manual De Usuario

Classeq Pass Through Range - User Manual
2.5

Warewasher Controls

Item Description
1 On/Off button
2 Cycle button
3 Cycle indicator (Note
2)
4 Fill/Heat indicator
(Note 1)
5 Program Select
button
6 Temperature Units
button
7 Program indicator
Item Description
8 Wash temperature
display
9 Rinse temperature
display
10 Temperature unit
display
11 Error indicator
12 Refill Salt indicator
(Note 3)
13 Wash indicator
14 Rinse indicator
Notes:
1. Fill/Heat indicator:
FLASHING AMBER - warewasher not
ready (Wash Tank not full / Rinse Tank
not full / Wash Tank still heating / Rinse
Tank still heating).
GREEN - warewasher is ready / in
standby (Wash Tank full / Rinse Tank
full).
Note that Tank full interlocks always
apply. Operating temperature
interlocks can be altered as required
(►5.6).
GREEN plus Cycle indicator BLUE -
warewasher will start the selected wash
cycle.
2. Cycle indicator:
GREEN plus BLUE – warewasher is in a
wash cycle.
BLUE plus Fill/Heat indicator
FLASHING AMBER - a wash cycle has
been selected but not started.
FLASHING BLUE - warewasher is
draining down (pumped drain
warewashers only).
RED - indicates that warewasher is in
Commissioning Mode.
RED plus warewasher turned off - a
serious error condition has occurred.
3. Fitted to warewashers with a Water Softener only.
UK
5