Information On Product Disposal - Elite Digital Smart B+ Manual De Instrucciones

ling cadence at a low resistance level. For
higher accuracy, use cadence sensors-the
wireless ELITE sensor that connects to the
hometrainer- or other wireless devices that
send data directly to the software/app.
If the hometrainer does not connect to the
app / cycle computer:
The hometrainer needs to be properly powered
up to work and it needs to connect to a device
within 2 minutes, otherwise it will automatical-
ly enter its energy saving phase. Start pedaling
or unplug it and plug it in again to reactivate it,
and then connect to a device within 2 minutes.
If the LED light on the motherboard does not
blink:
Use a tester to check if the power charger is
malfunctioning.

INFORMATION ON PRODUCT DISPOSAL

1) WITHIN THE EUROPEAN UNION
This product conforms with European Directives 2002/95/CE, 2002/96/CE
and 2003/108/CE
The crossed bin symbol given on the equipment or on the packaging indicates that at the end of its service
life the product must be collected separately from other waste.
Therefore at the end of its useful life the user must take the equipment to an appropriate centre for the
differentiated collection of electronic and electrotechnical waste, or return it to the dealer when purcha-
sing a new product of equivalent type.
Adequate differentiated collection for subsequent sending of the scrapped equipment to recycling, tre-
atment and environmentally-friendly disposal can help prevent possible negative consequences for the
environment and the health of people and favours the reuse and/or recycling of the materials from which
the equipment is made.
Improper disposal of the product by the user could involve penalties as specified by the regulations in
force.
2) IN NON-EU COUNTRIES
If you want to dispose of this product, please contact your local authorities and ask them what disposal
method applies.
¹ The ANT+ and Bluetooth Smart transmission
systems are compatible with the Wi-Fi stan-
dard, so there is usually no need to turn off
your Smartphone and router. The Wi-Fi signal
might
transmission, in which case it's important to
make sure that the Wi-Fi network uses a chan-
nel that is either14 or less than 6. Channels 7
through 13 might interfere with the hometrai-
ner's ANT or Bluetooth wireless transmission
system.
.
occasionally interfere
EN
with data
13