Singer 5560 Manual De Instrucciones página 32

2
TROUBLESHOOTING AND MAINTENANCE
Troubleshooting
(for models with built-in automatic needle threader)
Possible Cause: Needle not in correct position.
Solution: Raise needle to its highest position by turning hand wheel toward you. (See Page 14)
Possible Cause: Needle inserted incorrectly.
Solution: Needle all the way up in needle clamp (See Page 25)
Possible Cause: Needle is bent.
Solution: Remove bent needle, insert new needle. (See Page 25)
Possible Cause: Hook pin damaged.
Solution: Needle Threader needs replacement; contact authorized SINGER
Visit www.singerco.com.
Possible Cause: Thread not in take-up lever.
Solution: Rethread the machine, making sure the take up lever is in its highest position so
thread goes in the eye of the take up lever – turn machine hand wheel toward you to raise the
take up lever to its highest position for threading. (See Page 13)
Possible Cause: Thread path obstructed.
Solution: Check that thread is not caught on the thread spool or behind the spool cap. (See
Page 13)
Possible Cause: Bobbin winding spindle is engaged when you try to sew.
Solution: Disengage bobbin winding spindle. (See Page 11)
Possible Cause: Power cord and/or foot controller not plugged in correctly.
Solution: Make sure power cord/foot controller are correctly seated in machine and power
supply. (See Page 10)
Possible Cause: Wrong bobbins being used.
Solution: Use only SINGER
machine. (See Page 9)
32
14. NEEDLE THREADER NOT WORKING
15. LOUD NOISE WHEN SEWING
16. MACHINE WILL NOT RUN
branded bobbins that are same style as those that come with
®
service center:
®