Festool TURBO II M - 8 WP R1 Manual De Instrucciones página 28

Turbo II M
GB
Exhaust turbines
Turbo II M- 14 WP R1
Turbo II M - 14 WP R1 ATEX
Year of CE mark: 2014
The manufacturer bears sole responsibility for is-
suing this conformity declaration.
The subject of the declaration, as described above,
fulfils the relevant harmonisation legislation of the
European Union, as follows:
Turbo II M - 8 WP R1: 2006/42/EC, 2004/108/EC
(until 19.04.2016), 2014/30/EU (from 20.04.2016),
2011/65/EU, EN 60204-1:2006,
1:2006+A1:2009+A2:2011, EN 55014-2:1997+Corri-
gendum 1997+A1:2001+A2:2008,
2:2006+A1:2009+A2:2009,
EN 60335-2-69 Appx. AA:2011
Turbo II M - 8 WP R1 ATEX: 2006/42/EC, 2004/108/
EC (until 19.04.2016),
20.04.2016), 2011/65/EU, 94/9/EC, 2014/34/EU,
EN 60204-1:2006,
1:2006+A1:2009+A2:2011, EN 55014-2:1997+Corri-
gendum 1997+A1:2001+A2:2008,
2:2006+A1:2009+A2:2009, EN 61000-3-3:2013, EN
60335-2-69 Appx. AA:2011, EN 60079-0:2012 +
A11:2013, EN 60079-31:2014
Turbo II M - 14 WP R1: 2006/42/EC, 2004/108/EC
(until 19.04.2016), 2014/30/EU (from 20.04.2016),
2011/65/EU, EN 60204-1:2006,
1:2006+A1:2009+A2:2011, EN 55014-2:1997+Corri-
gendum 1997+A1:2001+A2:2008, EN 61000-3-
11:2000, EN 61000-3-12:2011*, EN 60335-2-69 Ap-
px. AA:2011
28
Serial no.
10014766
10016264
EN 55014-
EN 61000-3-
EN 61000-3-3:2013,
2014/30/EU (from
EN 55014-
EN 61000-3-
EN 55014-
Turbo II M - 14 WP R1 ATEX: 2006/42/EC, 2004/108/
EC (until 19.04.2016),
20.04.2016), 2011/65/EU, 94/9/EC, 2014/34/EU,
EEN 60204-1:2006,
1:2006+A1:2009+A2:2011, EN 55014-2:1997+Corri-
gendum 1997+A1:2001+A2:2008, EN 61000-3-
11:2000, EN 61000-3-12:2011*, EN 60335-2-69 Ap-
px. AA:2011, EN 60079-0:2012 + A11:2013, EN
60079-31:2014
* Information on Turbo II M - 14 WP R1 and Turbo
II M - 14 WP R1 ATEX according to EN 61000-3-12
Appx.C:
This device does not satisfy the requirements of
EN 61000-3-12:2011 Section 5. Therefore, the ap-
pliance can only be operated on its own supply net-
work. If the appliance is connected to a public low-
voltage grid, permission must be sought from the
distribution system operator or an intermediate
choke must be installed in accordance with the wir-
ing diagram.
Consult a qualified electrician – they will be able to
assist you with this.
Festool GmbH
Wertstr. 20, D-73240 Wendlingen, Germany
Dr. Johannes Steimel
Head of Research, Development and Technical
Documentation
2015-02-26
2014/30/EU (from
EN 55014-