Functional Description - Makita GS5000 Manual De Instrucciones

FUNCTIONAL DESCRIPTION

CAUTION:
Always be sure that the tool is switched off and
•
unplugged before adjusting or checking function
on the tool.
Switch action
B
A
C
010640
CAUTION:
Before plugging in the tool, always check to see
•
the switch trigger actuates properly and returns to
the "OFF" position when released.
For tool with the lock-on switch
CAUTION:
Switch can be locked in "ON" position for ease of
•
operator comfort during extended use. Apply
caution when locking tool in "ON" position and
maintain firm grasp on tool.
To start the tool, simply pull the switch trigger (in the B
direction). Release the switch trigger to stop. For
continuous operation, pull the switch trigger (in the B
direction) and then push in the lock lever (in the A
direction). To stop the tool from the locked position, pull
the switch trigger fully (in the B direction), then release it.
For tool with the lock-off switch
To prevent the switch trigger from accidentally pulled, a
lock lever is provided. To start the tool, push in the lock
lever (in the A direction) and then pull the switch trigger
(in the B direction). Release the switch trigger to stop.
For tool with the lock on and lock-off switch
To prevent the switch trigger from accidentally pulled, a
lock lever is provided.
To start the tool, push in the lock lever (in the A
direction) and then pull the switch trigger (in the B
direction). Release the switch trigger to stop.
For continuous operation, push in the lock lever (in the A
direction), pull the switch trigger (in the B direction) and
then pull the lock lever (in the C direction).
To stop the tool from the locked position, pull the switch
trigger fully (in the B direction), then release it.
1. Switch trigger
2. Lock lever
1
2
ASSEMBLY
CAUTION:
Always be sure that the tool is switched off and
•
unplugged before carrying out any work on the
tool.
013669
CAUTION:
When the wheel cover is positioned for more
•
safety, tighten the two hex bolts by the strength
more than 10N.m to secure the wheel cover
properly.
Installing or removing grinding wheel
CAUTION:
Before installing grinding wheel, always check that
•
a blotter part does not have any abnormalities
such as chips or cracks.
Overtightening the wheel can cause breakage.
•
Failure to tighten sufficiently will cause flutter.
Tighten the outer flange properly.
Always use the grinding wheel with the blotter that
•
has larger diameter than the lock nut or the outer
flange and the inner flange.
For tool with support cover only (country specific)
1
2
013624
Before installing or removing the grinding wheel, open
the support cover. Loosen the wing bolts on both sides
of the support cover and then open it.
After securing the wheel grinding, close the support
cover and then secure the wing bolts properly.
6
1. Hex wrench
1
2. Hex bolt
3. Hex lock nut
5
2
4. Tighten
5. Loosen
4
3
1. Wing bolt
2. Support cover