Product Description - Sharp LL-T2015 Manual De Funcionamiento

1 2 3
1. INPUT button .............................. To switch between the signal's input terminals.
2. MENU button .............................. This button is used to pop-up, select and close the OSD (On Screen
3. / MODE button ........................ When the OSD Menu is displayed:
4. buttons ................................ When the OSD Menu is displayed:
5. Power button ............................... Pressing this button turns the power on.
6. Power LED .................................. This LED is lit green when in use and orange when in power-saving
7. DVI-I input terminal (INPUT-2) ...... The computer
8. Analog RGB input terminal (INPUT-1) .... The analog signal cable is connected here. The analog signal cable
9. Security lock anchor ................... By connecting a security lock (commercially available) to the
10. Power terminal
11. Main power switch
12. Ventilation openings .................. Note: Never block the ventilation openings as this may lead to

Product description

4 5 6
Display) Menu.
This button is used to select menu options.
When the OSD Menu is not displayed:
This button is used to set DISPLAY MODE.
These buttons are used to select an option or adjust the value of
the selected option.
When the OSD Menu is not displayed:
These buttons are used to adjust backlight brightness.
Press the button again to turn the power off.
mode.
s digital RGB output terminal or analog RGB output
'
terminal can be connected here.
For a digital signal input: It can be connected to a computer with a
DVI-compatible output terminal (DVI-D24 pin or DVI-I29 pin) and
which has UXGA output ability. Depending on the computer to be
connected, correct display may or may not be possible.
included should be used.
security lock anchor, the monitor is fixed so that it cannot be
transported.
The security slot works in conjunction with Kensington Micro Saver
Security Systems.
overheating inside the monitor and result in malfunction.
11
7 8 9 10
12
11