Requirements For The Installation Location; Operating And Speed Settings; Grind Setting; Grinding Coffee - Graef CM 900 Manual De Instrucciones

Requirements for the installation location

For safe and flawless operation of the
appliance, the place of location must meet
these prerequisites:
The appliance must be set up on a firm, flat,
● ●
level, non-slip and heat resistant base that
has sufficient load bearing capacity.
Select the place of location so that children
● ●
cannot reach the hot surfaces of the appliance.
The appliance is not intended for installation
● ●
in a wall or a built-in cupboard.
Do not set up the appliance in a hot, wet or
● ●
moist environment.
The electric socket must be readily accessible
● ●
so that the power cord can be easily unplugged.

Operating and speed settings

Maximum operating time is 4 minutes. After
● ●
these 4 minutes please let the appliance cool
down to room temperature and start again.
14

Grind setting

You can influence the composition of the coffee
with various grind settings.
The wide range of grind settings allows you to
make a precise adjustment.
Notice: If you use a fine grind level, it is possible
that the coffee grounds clump together. During
grinding, slightly knock on the coffee bean
container cover so that any possible coffee
bean clumps do not block the grinding.
Accurate information on the grind setting can
● ●
not be made, since many factors such as type
of coffee / bean, room temperature, personal
taste, etc. play a role.
In general it takes a finer grind for espresso,
● ●
a medium grind for drip coffee and a coarser
grind for French press.

Grinding coffee

Plug the plug into the electric socket.
● ●
Fill the coffee bean container with coffee
● ●
beans.