Tabla De Contenido; Vibration Emission; Uncertainty (K): 1.5 M/S; The Vibration Total Value (Tri-Axial Vector Sum) Determined - Makita HR3540C Manual De Instrucciones

For Model HR3540C
For European countries only
Noise
The typical A-weighted noise level determined according
to EN60745-2-6:
Sound pressure level (L
Sound power level (L
Uncertainty (K): 3 dB (A)
Wear ear protection
Vibration
The vibration total value (tri-axial vector sum) determined
according to EN60745-2-6:
Work mode: chiselling function
Vibration emission (a
Uncertainty (K): 1.5 m/s
Work mode: hammer drilling into concrete, 20 mm
diameter and 165 mm depth
Vibration emission (a

Uncertainty (K): 1.5 m/s

Work mode: drilling into metal
Vibration emission (a
Uncertainty (K): 1.5 m/s
For Model HR3541FC
For European countries only
Noise
The typical A-weighted noise level determined according
to EN60745-2-6:
Sound pressure level (L
Sound power level (L
Uncertainty (K): 3 dB (A)
Wear ear protection
Vibration

The vibration total value (tri-axial vector sum) determined

according to EN60745-2-6:

Work mode: chiselling function

Vibration emission (a
Uncertainty (K): 1.5 m/s

Work mode: hammer drilling into concrete, 20 mm

diameter and 165 mm depth

Vibration emission (a
Uncertainty (K): 1.5 m/s
Work mode: drilling into metal
Vibration emission (a
ENG102-1
): 93 dB (A)
pA
): 104 dB (A)
WA
ENG215-1
2
): 12.5 m/s
h,CHeq
2
ENG303-1
2
): 18.0 m/s
h,HD
2
ENG301-1
2
): 2.5 m/s
h,D
2
ENG102-1
): 91 dB (A)
pA
): 102 dB (A)
WA
ENG215-1
2
): 9 m/s
h,CHeq
2
ENG303-1
2
): 11 m/s

h,HD

2
ENG302-1
2
): 2.5 m/s or less
h,D
EC-DECLARATION OF CONFORMITY
Model; HR3540C, HR3541FC
We declare under our sole responsibility that this product
is in compliance with the following standards of
standardized documents; EN60745, EN55014, EN61000
in accordance with Council Directives, 2004/108/EC,
98/37/EC.
Tomoyasu Kato
Responsible Manufacturer:
Makita Corporation
3-11-8, Sumiyoshi-cho, Anjo, Aichi, JAPAN
Authorized Representative in Europe:
Makita International Europe Ltd.
Michigan Drive, Tongwell, Milton Keynes, Bucks MK15
8JD, ENGLAND
CE 2007
Director
ENH101-8
9