OPERATING INSTRUCTIONS
Care & Maintenance of the Steam
Pocket Towel
Due to the unique cleaning ability of this
cloth, proper care of your micro-fiber towel
is required to ensure long life and
continued cleaning ability.
• The first thing you should do when
you get a new micro-fiber towel is to
wash and dry it. During the
manufacturing process the fabric has a
tendency to become flat as it picks up
contaminants from the air and
machinery. There will also be a number
of loose threads that, while they cause
no harm, can be annoying the first time
you use the towel.
• To clean the towel, simply wash it in your
washing machine using the warm water
setting.
• Always wash your towels separately
from other fabrics. They have a tendency
to pick up lint and other particles from
other fabrics and the next time you use
your towel, this lint will transfer to the
surface being cleaned.
• ONLY USE LIQUID DETERGENTS,
never use dry detergents as many times
the granules do not fully dissolve and
become trapped in the towel. This can
scratch the surface that you are
cleaning.
• NEVER USE BLEACH OR FABRIC
SOFTENERS! Bleach will damage the
micro-fiber fabric and fabric softeners
deposit a coating on the micro-fiber
fabric what will not allow the cloth to
clean efficiently.
• Air dry the towel. Do not put in a clothes
dryer as high heat will cause the towel to
shrink and the micro-fibers to break
down.
• If you wash your towel on a regular basis
and don't let them get too dirty, they will
last much longer. As with any fabric, dirt
particles, grease and other contaminants
can cause the fibers to break down,
therefore regular cleaning will help
preserve your micro-fiber towels.
• As you use the micro-fiber towel, you will
notice that sometimes a thread will
loosen or pull out. This is normal and
you should NEVER PULL AT THE
LOOSE THREAD! Pulling the thread can
cause the weave to come undone.
Instead, simply trim the thread with a
pair of sharp scissors.
CAUTION: Be aware of hand placement
and take care not to actuate the steam
discharge switch while installing or
removing accessories.
Attaching the Accessories to the
Flexible Steam Hose
Allow the unit to cool for 5 minutes
before changing accessories.
Window Squeegee
This attachment is very useful for
cleaning large windows, plastic
material, ceramic, tiled or marble
surfaces.
IMPORTANT:
When cleaning
windows, always avoid any sudden
changes in temperature to prevent
glass breakage or cracks.
To use: Connect the window
squeegee to the hand
grip or use with
extension tube for
hard to reach surfaces.
Apply steam abundantly, then remove
excess water and dirt with the glass
wiping edge.
Extended Concentrator
Use the extended concentrator
to clean under toilet rims
and hard to reach places.
To use: Attach the extended
concentrator to the handgrip or to
the extension tubes.
Nylon Bristle Brush (x2)
It is best for cleaning grout in-between
the tiles, ceramic and marble.
To use: Screw on the nylon
bristle brush on to the end
of the extended
concentrator, which
then may be used directly
on the hand grip or with extension
tubes.
7
OPERATING INSTRUCTIONS
Attaching the Shoulder Strap
Using the detachable shoulder strap
allows for greater freedom of movement
when both hands are needed for
various cleaning tasks. To attach the
shoulder strap to the steam cleaner,
simply snap the shoulder strap hooks
onto the connecting rings on the unit
body. (Fig. 8, 9 & 10)
Connecting
points
Connecting
points
Fig. 8
Fig. 9
Fig. 10
IMPORTANT:
When using the
steam cleaner with the shoulder
strap, avoid rocking or tilting the unit
excessively as this may cause water
to enter the hose and be discharged
along with the steam.
8