DJO Global ARTROMOT-E2 Manual De Instrucciones página 42

Note!
• if a pause has been programmed, the
carriage will stop for the pause each
time the maximum stretching value is
attained.
• Enabling the stretching in extension
function automatically disables mo-
tor b. The only movement performed
is extension/lexion.
• it is not possible to combine a second
stretching function with the special
function „stretching in extension".
• during operation, the display will
show the symbol in the upper,
left-hand corner.
Stretching in lexion
with the special "stretching in lex-
ion" function the joint will be gently
stretched (arm bending movement).
Only the extension/lexion movement
is treated here. Motor b is automatically
disabled. The position of motor b cannot
be changed once this special function
has been activated.
starting at the middle position the car-
riage will irst move to the programmed
extension limit and then to the pro-
grammed lexion limit.
subsequently the carriage reverses 5 °
towards extension and then moves very
slowly back to the programmed lexion
value (symbol: ). Then the carriage
attempts to attain another 5 ° at an
even slower speed (symbol: ).
if a high resistance toward the ad-
ditional 5 ° is sensed, the reverse on
load function is automatically activated
and the carriage moves in the opposite
direction.
This stretch cycle is repeated ten times.
After that the carriage moves to the
programmed extension limit and re-
starts the stretching in lexion cycle.
This sequence can be repeated as often
as needed. You can stop treatment
with the STOP key; after the pro-
grammed therapy duration, it will stop
automatically.
Default: disabled
74
Note!
• if a pause has been programmed, the
carriage will stop for the pause each
time the maximum stretching value is
attained.
• Enabling the stretching in lexion
function automatically disables mo-
tor b. The only movement performed
is extension/lexion.
• it is not possible to combine a second
stretching function with the special
function "stretching in extension".
• during operation, the display will
show the symbol in the upper,
left-hand corner.
Stretching in pronation
with the special "stretching in prona-
tion" function the joint will be gently
stretched in the pronation direction.
Only the pronation/supination move-
ment is treated here. Motor A is auto-
matically disabled. The position of motor
A cannot be changed once this special
function has been activated.
starting at the middle position the car-
riage will irst move to the programmed
supination position and then to the
programmed pronation position.
subsequently the carriage reverses 5 °
towards supination and then moves very
slowly back to the programmed prona-
tion value (symbol: ). subsequently
the carriage attempts to attain another
5 ° at an even slower speed (symbol: ).
if a high resistance toward the ad-
ditional 5 ° is sensed, the reverse on
load function is automatically activated
and the carriage moves in the opposite
direction.
This stretch cycle is repeated ten times.
After that the carriage moves to the
programmed maximum supination
position and restarts the stretching in
pronation cycle.
This sequence can be repeated as often
as needed. You can stop treatment
with the STOP key; after the pro-
grammed therapy duration, it will stop
automatically.
Default: disabled
Note!
• if a pause has been programmed, the
carriage will stop for the pause each
time the maximum stretching value is
attained.
• Enabling the stretching in pronation
function automatically disables mo-
tor A. The only movement performed
is pronation/supination.
• it is not possible to combine a second
stretching function with the special
function "stretching in pronation".
• during operation, the display will
show the symbol in the upper,
left-hand corner.
Stretching in supination
with the special "stretching in supina-
tion" function the joint will be gently
stretched in the supination direction.
Only the pronation/supination move-
ment is treated here. Motor A is auto-
matically disabled. The position of motor
A cannot be changed once this special
function has been activated.
starting at the middle position the car-
riage will irst move to the programmed
pronation position and then to the
programmed supination position.
subsequently the carriage reverses 5 °
towards pronation and then moves very
slowly back to the programmed supina-
tion value (symbol: ). subsequently
the carriage attempts to attain another
5 ° at an even slower speed (symbol: ).
if a high resistance toward the ad-
ditional 5 ° is sensed, the reverse on
load function is automatically activated
and the carriage moves in the opposite
direction.
This stretch cycle is repeated ten times.
After that the carriage moves to the
programmed maximum pronation
position and restarts the stretching in
supination cycle.
This sequence can be repeated as often
as needed. You can stop treatment
with the STOP key; after the pro-
grammed therapy duration, it will stop
automatically.
Default: disabled
75
Note!
• if a pause has been programmed, the
carriage will stop for the pause each
time the maximum stretching value is
attained.
• Enabling the stretching in supination
function automatically disables mo-
tor A. The only movement performed
is pronation/supination.
• it is not possible to combine a second
stretching function with the special
function "stretching in supination".
• during operation, the display will
show the symbol in the upper,
left-hand corner.