Care And Maintenance; Install Remote Control Batteries; Remote Control Description - Trevi IPD 8450T Manual De Uso

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 36
ENGLISH
NOTES ON USE
This is a precision electronic appliance; avoid using it in the following cases:
Near heat sources such as radiators and stoves.
In damp areas such as bathrooms, swimming pools, etc.
In dusty areas.
In places subject to strong vibrations.
Place the device leaving at least 5 cm of clearance on each side to allow air circulation.
Do not block air vents.
If any liquid should penetrate inside the device, immediately disconnect the power supply and bring the device to the nearest authorised
TREVI service centre.
Before turning the device on, always check that the supply and connection cables have been installed correctly.

CARE AND MAINTENANCE

Clean with a slightly damp soft cloth. Do not use solvents and abrasive substances.
IMPORTANT
This appliance has been carefully built to ensure long-lasting perfect performance. However, should any inconvenience occur, please contact
your local authorised TREVI Service Centre.
TREVI pursuits a constant R&D policy. Therefore, products may have different features from those described.
UNIT CONTROLS DESCRIPTION
1. VOL- key, decreases volume
2. VOL+ key, increases volume
3. POWER key, turns the device on or off
4. / key, track playback or pause
5. iPod/iPhone connector
6. TUN+ key, select next iPod/iPhone track / forward radio tuning.
7. TUN- key, select previous iPod/iPhone track / backward radio
tuning.
8. SOURCE key, select source
9. LCD Display
10. IR Sensor
11. A/V inputs
12. Component Video output (Y/Pb/Pr)
13. LINE IN input
14. Subwoofer output
15. Composite Video output
16. RESET key
17. AC 110~240V 50/60Hz power supply cable

INSTALL REMOTE CONTROL BATTERIES

Note: batteries are not included
Open the battery compartment on the back of the remote control.
Insert 2 AAA batteries making sure to comply with the polarity and the indications inside the battery compartment.
Close the battery compartment.
In order to prevent fluid leakage from the batteries and subsequent damage to the remote control, make sure that the batteries are installed
correctly and do not use different kinds of batteries (old with new, alkaline with zinc-carbon, etc.).
Remove the batteries from the remote control if it is not to be used for long periods of time.

REMOTE CONTROL DESCRIPTION

1. MUTE key, temporarily mutes audio
2. POWER key, turns the device on or off
3. Numeric keypad
4. Number key 0 / VIDEO, switches between Component Video
Output and Composite Video Output
5. Number key 9 / CLOCK SYNC, syncs the device's clock with
your iPod/iPhone's.
6. PLAY LIST +/- keys, select next/previous iPod/iPhone Playlist
track
7. ALBUM +/- keys, select next/previous iPod/iPhone album
8. SLEEP key, enables/disables the SLEEP function
9. iPod- / TUN- key, select previous iPod/iPhone track / backward
radio tuning
10. Navigation key 
11. CHAPTER +/- keys, select next/previous iPod/iPhone chapter
12. SOURCE key, select source
13. DIMMER key, increases/decreases LCD display brightness
14. REPEAT/ST key, repeat iPod/iPhone track/album / select mono/
stereo tuner mode
15. MENU key, direct access to iPod/iPhone's menu to navigate
folders
16. TREBLE +/- keys, increase/decrease high frequencies
17. BASS +/- keys, increase/decrease low frequencies
18. CLOCK VIEW / SHUFFLE key, displays time on the LCD display
/ enables/disables random playback for iPod/iPhone's tracks
19. Navigation key 
20. SELECT keys, confirm selection
21. iPod+ / TUN+ key, select next iPod/iPhone track / forward radio
tuning
22. VOL+/- keys, increase/decrease volume
23. / / TIME SET / MEM key, play/pause track / time setting /
store radio stations
12
IPD 8450T

Publicidad

Tabla de contenido
loading

Productos relacionados para Trevi IPD 8450T

Tabla de contenido