Basic Operation - Trevi IPD 8450T Manual De Uso

ENGLISH
INSTALLATION AND CONNECTIONS
LINE-IN INPUT CONNECTION
Connect the LINE IN input (13) on the back of the speaker unit with the provided stereo jack audio cable to the stereo jack audio output

of any device (MP3 player, portable CD player, ...).
AUDIO/VIDEO INPUT CONNECTION
Connect A/V inputs (11) on the back of the speaker unit with the provided RCA cables to the A/V output of any device (Mpeg4-DVD

player, Video recorder, Camera, ...). Make sure to comply with the source colour scheme: yellow for video, white for left audio output
and red for right audio output.
COMPOSITE VIDEO OUTPUT CONNECTION
Connect the Composite Video output (15) on the back of the speaker unit with a Composite Video cable (not provided) to the Composite

Video input of a TV device.
COMPONENT VIDEO OUTPUT (Y/Pb/Pr) CONNECTION
Connect the Component Video output (Y/Pb/Pr) (12) on the back of the speaker unit with a Y/Pb/Pr cable (not provided) to the Y/Pb/Pr

input of a TV device. Make sure to comply with the video outputs colour scheme: green for Y, blue for Pb, red for Pr.
SUBWOOFER OUTPUT CONNECTION
Use an RCA cable (not provided) to connect the Subwoofer output on the back of the speaker unit to the input of a powered Subwoofer

or of an amplifier connected with a Subwoofer.
Unless otherwise specified, control descriptions apply both to the appliance and the remote control.

BASIC OPERATION

TURNING ON
Connect the power supply cable (17) to an AC 110~240V 50/60Hz socket.

Stand-by mode activates automatically (clock is displayed)

Press the POWER key (2) to turn the speaker unit on.

Press the POWER key again (2) to re-enter the standby mode.

VOLUME CONTROL AND MUTE FUNCTION
Press VOL+ and VOL- (22) keys to increase/decrease the speaker unit's volume.

Press MUTE (1) to temporarily turn the audio off. Press it again to restore it.

TREBLE AND BASS CONTROL
Press TREBLE +/- (16) to increase/decrease the high frequencies of the speaker unit.

Press BASS +/- (17) to increase/decrease the low frequencies of the speaker unit.
SOURCE SELECTION
Press the SOURCE key (12) repeatedly to select the source: TUNER (radio), AV (A/V inputs),

LINE (LINE IN input), IPOD (iPod/iPhone).
DIMMER ADJUSTMENT
Press the DIMMER key (13) to adjust the brightness of the LCD display.

RESET
Press the RESET key (16) to restore the factory settings in case of malfunction.

SLEEP FUNCTION
Press in sequence the SLEEP key (8) to activate automatic speaker unit's power-off. The auto power-off timer can be set on 90, 80, 70,

60, 50, 40, 30, 20, 10 minutes, otherwise select OFF to disable it. When enabled the SLEEP sign will be displayed.
CLOCK SETTING
MANUAL ADJUSTMENT
1. In stand-by mode press and hold / (4) on the speaker unit or TIME SET(23) on the remote control to activate clock setting; the
hours figure will start flashing.
2. Using the TUN+ (6) and TUN- (7) keys on the speaker unit or TUN+ (21) and TUN- (9) on the remote control, select the hours figure
and then press / (4) on the speaker unit or TIME SET(23) on the remote control to confirm; the minutes figure will start flashing.
3. Using the TUN+ (6) and TUN- (7) keys on the speaker unit or TUN+ (21) and TUN- (9) on the remote control, select the minutes figure
and then press / (4) on the speaker unit or TIME SET(23) on the remote control to confirm.
AUTOMATIC ADJUSTMENT
Once an iPod/iPhone is connected, the unit's clock will sync with the iPod/iPhone's automatically. Subsequent docking long press CLOCK
SYNC (5) to sync the clock.
13
IPD 8450T