Replacing Filters For In-Line Recovery Modules; Coils; Dampers - S&P UTBS Serie Instrucciones De Uso

9.5.2. rEPlaCING fIlTErs fOr IN-lINE rECOVErY MODUlEs

To remove the filter, open the inspection door by pulling it out. Turn the handle and remove
the filter.

9.6. COIls

If you detect any problem in the coils and they need to be removed, loosen the bolts from the
panel where they are located, remove the panel and extract the coils. The coils are installed in
slod for easy slide in and slide out.

9.7. DaMPErs

• Make sure that the damper can open and close unrestrictedly and the (way) is unobstruc-
ted.
• For manually controlled dampers fix the handle firmly to prevent the damper close while the
unit is running.
64