Charging
The NiCd-battery (nominal voltage 6 V – charging capacity max. 1900 mAh) is charged
only partially and must be recharged approx. 18 hours before use.
Plug the charging plug into
the basic unit (A) and the
power supply/charger into a
socket.
It is normal for the unit to
become warm during char-
ging.
It is advisable to recharge the battery vacuum cleaner
after each time it is used for a long time so that it is fully
charged and ready for the next use.
Avoid a total discharge of the batterry. This could damage
it and reduce the maximum charging capacity, i.e. shorten
the running time.
Note :
The ON / OFF switch must be switched off
while charging.
Directions for use
12
operation and use
A
The ON / OFF switch has 3 positions:
OFF
vacuum cleaner is switched off
AC
vacuum cleaner is switched on.........by 230 V AC
electric suction brush is switched on.....by 6 V DC
DC
vacuum cleaner is switched..................by 6 V DC
electric suction brush is switched o.....by 6 V DC