CASUALPLAY beat rs Instrucciones De Uso página 17

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 1
IMPORTANT: Press the clip to make it easier (fig. 5b).
• Push the handle down until you hear a "click" sound (in both sides) (fig. 6b).
NOTE: To unlock the handle press the release red lever and move the handle
upwards.
WARNING: In case the female buckle anchorage belt is too long, we suggest to
pass it through as shown in figure 7b.
• Adjustment of the crotch strap: Press the adjuster and at the same time place
it into the desired position (fig. 8b), so that the pelvis is firmly engaged.
GROUP 2 (15 - 25 KGS)
fitting of autoplay in forward-facing position with a three-point safety belt
(car seat belt)
• Fit the child seat on the front or rear seat of the car (fig. 1c).
• Move the handle upwards as shown in (fig. 2c) (in both sides).
• Pass the waist strap through the guides in both sides (fig. 3c), fasten the buckle
and tighten
• Pass the chest strap through the lock -off clip (fig. 4c) and tighten the belt.
• Push the handle down until you hear a "click" sound (in both sides) (fig. 5c).
NOTE: To unlock the handle press the release red lever and move the handle
upwards.
• Adjustment of the crotch strap: press the adjuster and at the same time
place it into the desired position (fig. 6c), so that the pelvis is firmly engaged.
(1D) HARNESS ADJUSTMENT TO CHILD GROWTH
• The AUTOPLAY has in the seat back three sets of slots for adjustment of
shoulder straps as your child grows.
• Use lower slots up to 6 months of age.
• Use middle slots for children from 6 months to 1 year.
• Use upper slots for children from 1 to 4 years.
• See in (fig. 2d) how to change shoulder straps.
(3D) HARNESS ADJUSTMENT
• It is recommended to adjust harness length to child size before fitting the child seat
15

Publicidad

Tabla de contenido
loading

Tabla de contenido