Safety Instructions - Popp SIRIS 58607.00.011.01 Instrucciones De Servicio

Operating manual SIRIS
We are glad that you have chosen high-quality movement sensors manufactured by POPP.
Please read the following operating manual carefully before commissioning the movement
sensor in order to guarantee its perfect function.

1. SAFETY INSTRUCTIONS

CAUTION: work on the 230V power supply must only be performed by authorised qualified
personnel in accordance with the local installation regulations/standards. Before mounting the
product, the mains supply must be switched off and secured against switching on again.
The product may only be used properly (as described in the operating manual). Any warranty
claim lapses if changes or modifications have been made or if the device has been painted. The
movement sensor must be checked for damage immediately after unpacking. In case of damage,
the device may not be commissioned.
If hazard-free operation of the device cannot be guaranteed, it must be switched off immediately
and secured against inadvertent operation.
2. DESCRIPTION
The POPP SIRIS movement sensors with 120°/200°/270°/360° detection area are passive
infrared sensors which react to moving sources of heat (people, vehicles). If the movement
sensor detects changes to the heat radiation in its detection area, it switches on, depending on
the light value of the load connected (e.g. lighting), for an adjustable duration. If the heat
source then exits the detection area, the movement sensor switches the load off again after a
time you have pre-selected (3sec. – 20min.)
The POPP movement sensor series SIRIS can be mounted on the wall or on the ceiling without
additional accessories.
You can optionally order corner adapter plates for interior corner mounting (order no. 761 958)
or for exterior corner mounting (order no. 761 941).
The POPP movement sensor is equipped with a plant program, with which the sensor works
according to pre-set values (10 Lux, 2 min., max. electronic range).
Short-term pulse function (for timers, gongs etc.)
An added feature of the installation is offered by the short-term pulse function; this can be
activated by an integrated potentiometer located underneath the cover ring of the sensor. This
way, e.g. automated stairwell
lights in larger buildings can be activated automatically or lights in rooms with changing
ambient light can be operated more energy-efficiently.
POPP GmbH · Bad Berneck · Germany · www.popp.eu