Trouble Shooting; During Operation - FujiFilm instax SQUARE SQ10 Manual De Instrucciones

TROUBLE SHOOTING

Review below if you think the camera has some trouble. If you cannot find the solution, contact a FUJIFILM
authorized distributor.
Or visit our website below.
FUJIFILM website ： http://fujifilm.com/

During operation

Problem
The camera cannot be
turned on.
The battery runs out
too fast.
The camera turns off
during operation.
The battery charge does
not start.
It takes long to charge
the battery.
During the battery
charge, the AF-assist
illuminator/Self timer
lamp flashes, or an error
message appears on the
LCD monitor, indicating
that the battery cannot
be charged.
Possible Causes
① The battery power is low.
② The battery is not inserted correctly.
① You are using the camera in a very
cold place.
② The battery terminals are dirty.
③ You are using the same battery for a
long period of time.
● The battery is running out.
① The battery is not inserted.
② The battery orientation is wrong.
③ The AC power adapter plug is not
connected to the indoor power
outlet correctly.
● You are charging the battery in a
very cold place.
① The battery terminals are dirty.
② The battery has reached the end
of its charging life, or it has broken
down.
③ The battery is too warm or too cold.
Solution
① Charge the battery fully.
② Insert the battery correctly.
① Put the battery in your pocket to warm it, and
insert it immediately before you use the camera.
② Remove the battery, clean the terminals with a
dry and clean cloth, then reinsert the battery.
③ The battery has reached the end of its charging
life. Replace with a new battery.
● Replace with a fully-charged battery.
① Insert the battery.
② Reinsert the battery in the correct orientation.
③ Plug in the AC power adapter to the indoor power
outlet correctly.
● It may take long to charge the battery when it is
cold.
① Remove the battery, clean the terminals with a
dry and clean cloth, then reinsert the battery.
Insert it in the correct orientation.
② Replace with a new battery. If this does not solve
the problem, contact a FUJIFILM authorized
distributor.
③ Charge the battery again when the battery is
stable in its temperature.
EN
29