Publicidad
Idiomas disponibles
Idiomas disponibles
5
INSTALL THE ICEMAKER FILL CUP
Install the icemaker fill cup (side-mounted) (17) into the
icemaker as shown.
6
PLUG IN THE ICEMAKER
Place the icemaker in the freezer compartment on its
side as shown. Insert the icemaker power cord plug
(D) into the socket on the side wall, making sure the
prongs and holes are matched. If holes do not match,
see Step 4. Press the plug firmly into the socket.
MOUNT THE ICEMAKER
7
• Lift the icemaker so the fill tube extension
(10) fits in the fill cup opening (E). Hang the
icemaker on the two mounting screws (C).
Make sure:
• The power cord is still firmly in the socket.
• The fill tube extension (10) is still in the fill cup
opening. (Check the rear of the refrigerator to
make sure the fill tube has not been pushed out
of the back of the refrigerator).
• The icemaker mounting screws are located in
the uppermost position of the mounting slots.
THEN SECURELY TIGHTEN THE ICEMAKER
MOUNTING SCREWS.
Installation Instructions
17
D
10
C
E
8
INSTALL THE ICE BUCKET
Put the ice bucket (11) directly under the icemaker
(to the left and all the way to the rear of the shelf
under the icemaker).
Make sure the icemaker power switch is set to OFF.
9
ATTACH WARRANTY LABEL
A label (9) is provided with this kit to record the date of
installation for warranty purposes. Apply it to the back
of the refrigerator.
10
KEEP THIS MANUAL
The warranty for the icemaker is printed in this
manual. Keep this manual with your Refrigerator
Owner's Manual.
The icemaker installation inside the freezer is now
complete. Continue to the Water Valve Assembly
section.
11
11
Publicidad
