Printer Test; Maintenance - Mettler Toledo P25 Serie Instrucciones De Manejo

Applications (P28 only)
Press briefly
Statistics Application
Esc
M+
Esc
M+
F
Menu
Esc
M+
Important notes
• Unit change during the application is not permitted.
• Maximal 999 sample.
• Sample weight must be in the range of 70% - 130% of the current average value.
1)
• Minimum dynamic weight changed must be 100 d.
Minimum weights + 1 d.
2)
5

Printer Test

The Printer is equipped with a self-test that automatically prints out the character set of the printer.
(standard IBM/DOS).
Starting the test
Terminating the test
6

Maintenance

Under normal conditions the Printer requires practically no maintenance. The METTLER TOLEDO
service department is available if servicing is required. Please ask your responsible METTLER
TOLEDO dealer for details.
14 Printer P25, P26, P28
Press and hold down
1)
Þ Start "Statistics applica-
tion" (LED on).
Þ Add a new sample and
press «M+».
Þ If needed print subtotal
press the «F» key.
Þ Print and end "Statistics
application" (LED off).
Þ Press the key «h» and power on the Printer.
The printer prints out the current settings.
Þ Power off the Printer.
Totaling Application
2)
Þ Start "Totaling applica-
Esc
M+
Þ Add a new sample and
Esc
M+
Þ If needed print subtotal
F
Menu
Þ Print and end "Totaling
Esc
M+
tion" (LED on).
press «M+».
press the «F» key.
application" (LED off).