GB
Checklist ...
To ensure optimum safety for your child, always check the following points after installation:
• Make sure the seat belt is tight and that it is not twisted;
• Make sure both belt parts pass through the belt openings in the base and underneath the blue belt clamp;
• Make sure the anchor leg is fully folded out;
• Make sure that the indicator on the foot of the anchor leg is green;
• Make sure the EasyBase is completely and stably fixed within the car by pulling on the EasyBase.
C. Removing the EasyBase
• Push back the anchor leg to its starting position by pressing the adjustment knob (8,1) and sliding the
8
anchor leg upward (8,2).
• Release the seat belt (9,1) and open the blue seat-belt clamp (9,2).
9
10
• Remove the seat belt from between the base and the blue seat-belt clamp (10,1) and close the seat-belt
clamp (10,2).
• Remove the EasyBase from the car.
4. INSTALLATION AND REMOVAL OF THE CABRIOFIX
A. Installation of the CabrioFix
• Place the CabrioFix back to front (your child will be facing the rear) on top of the EasyBase (11).
11
Make sure that the carrying handle is in the upright position.
• Click the two pins of the CabrioFix onto the anchor points of the EasyBase (12).
12
• ATTENTION! You should hear a clearly audible click and the indicators will now be green (13).
13
• ATTENTION! Never use the product if the indicator remains red. Repeat all of the above actions. If you
are in any doubt or if you have any questions, please contact the manufacturer.
• Check correct mounting by pulling on the CabrioFix.
Before putting your child into the CabrioFix and removing it, please refer to the instruction manual of the
CabrioFix. Only if it is used in the correct way will the safety of your child be optimally guaranteed. That's
why we recommend that you take the time to read these instructions carefully. If you are no longer in
possession of these user instructions, please contact our service point in your country or download the
necessary information from our website: www.maxi-cosi.com.
10
English