Event List; Replacement Parts And Accessories - Hach Flow Paddlewheel Sensor Manual Del Usuario

Table 7 Warning list for the sensor (continued)
Warning Description
OUTPUTS ON HOLD During calibration, the
outputs were set to hold
for a selected time.

Event list

The controller provides one event log for each sensor. The event log stores
a variety of events that occur on the devices such as configuration
changes, alarms, warning conditions, etc. A list of possible events is shown
in Table 8. The event log can be exported in a CSV format. For instructions
on downloading the logs, refer to the controller user manual.
Table 8 Event list for the sensor
Event Description
POWER ON EVENT The power was turned on.
CHANGE IN CONFIG - float The configuration changed-floating number
CHANGE IN CONFIG - int The configuration changed-integer number
CHANGE IN CONFIG - text The configuration changed-text string
OFFSET CAL START Start of an offset calibration
OFFSET CAL END End of an offset calibration
SET TO CAL START Start of a set-to calibration
SET TO CAL END End of a set-to calibration
CONFIG DEFAULTS The configuration was reset to default options.
CALIB DEFAULTS The user calibration is reset to defaults.

Replacement parts and accessories

Note: Product and Article numbers may vary for some selling regions. Contact the
appropriate distributor or refer to the company website for contact information.
2
Each repair kit includes impeller, shaft, metal pin, two O-rings and packet of silicone grease.
Description
Resolution
Sensor, tee-mount, polypropylene
The outputs will become
active after the selected Sensor, tee-mount, PVDF
time period.
Sensor, pipe thread, stainless steel
Sensor, pipe thread, brass
Repair kit, tee-mount sensor (for polypropylene sensor, model
F1A11A1 only)
Repair kit, tee-mount sensor (for PVDF sensor, model
F1A11B2 only)
Repair kit, pipe thread sensor (for stainless steel and brass
sensors, models F1A12C1 and F1A12D1)
Insertion tool (required to insert a hot tap flow sensor into the
process pipe or remove the sensor from the process pipe)
Cable, interconnect
Junction box, NEMA 4X
2
2
2
Item no.
F1A11A1
F1A11B2
F1A12C1
F1A12D1
F1-1001-101
F1-1001-102
F1-1001-103
F1-1002
1W1127
76A4010-001
English 17