Product Overview - Hach Flow Paddlewheel Sensor Manual Del Usuario

Product overview

This sensor is designed to work with a controller for data collection and
operation. Multiple controllers can be used with this sensor. This document
assumes sensor installation and use with an sc200 controller. To use the
sensor with other controllers, refer to the user manual for the controller
that is used.
For paddle wheel sensor styles, refer to
use a locking pin to fasten them in to a mounting tee.
Pipe thread style sensors have a 2-in. NPT hex-mount adapter that threads
in to these items:
• A standard 2-in. NPT pipe tee
• A pipe saddle
• A pipe tee with 2.5-in. NPT ends
• A pipe weldolet
Figure 1. Tee-mount style sensors
Figure 1 Sensor styles
1 Tee-mount 2 Pipe thread
Installation
W A R N I N G
Personal injury hazard. Only qualified personnel should conduct the tasks
described in this section of the manual.
Mounting
D A N G E R
Explosion hazard. The sensor is not approved for use in hazardous locations.
3 Hot tap
English 5