Technical Specifications; Additional Safety Rules; Replacement Parts - Flex SKE 2902 VV Instrucciones De Funcionamiento

Part Number
Voltage supply
Power consumption
Power output
Frequency
Strokes per minute (max.)
Working ranges (max.)
Wood
Metal
A-weighted levels:
sound pressure level
sound power level
Wear ear protection!
Typical Mean effective Acceleration
Weight
With case and accessories
Without case and accessories

ADDITIONAL SAFETY RULES

1
Hold tool by insulated gripping surfaces when performing an operation where the cutting tool
may contact hidden wiring or its own cord.
Contact with a "live" wire will make exposed metal parts of the tool "live" and shock the operator.
2. KEEP HANDS AWAY from cutting area.
3. ALWAYS USE sharp blades.
4. STAY CLEAR of end pieces that may fall after being cut off.
5. ALWAYS use the correct blade recommended for the material being cut.
6. DO NOT OPERATE the SKE 2902 VVSKE with guide shoe removed (see PIVOTING GUIDE SHOE
Section of this Manual).
7. DO NOT ATTEMPT to plunge cut metal.
8.
WARNING
particles, including wood dust, crystalline silica dust and asbestos dust.
Direct particles away from face and body. Always operate tool in well ventilated area and provide for
proper dust removal. Use dust collection system wherever possible. Exposure to the dust may cause
serious and permanent respiratory or other injury, including silicosis (a serious lung disease), cancer,
and death. Avoid breathing the dust, and avoid prolonged contact with dust. Allowing dust to get into
your mouth or eyes, or lay on your skin may promote absorption of harmful material. Always use
properly fitting NIOSH/OSHA approved respiratory protection appropriate for the dust exposure, and
wash exposed areas with soap and water.

REPLACEMENT PARTS

When servicing use only identical replacement parts.
8

TECHNICAL SPECIFICATIONS

Use of this tool can generate and disburse dust or other airborne
331.678
230 V
1200 W
670 W
50 Hz
2600 SPM
305 mm
19 mm
88 dB
101 dB
20 m/s²
9.5 kg
4.5 kg