Unpacking The Laminator - SEAL 54 EL Manual Del Usuario

3.5 Unpacking the laminator

1. Cut the bands holding the box to the pallet.
2. With two people, carefully lift the box straight up over the machine (See figure 2).
3. Remove any loose packing material.
4. Remove two wood screws holding ramp in place.
5. Remove the ramp and packing around ramp.
6. Position ramp as shown in figure 3.
7. Remove 4 hold down bolts.
8. Remove 2 stabilizing blocks.
9. With 2 people, carefully push machine down ramp.
10. Remove remaining packing material and unpack the Take-up Tube.
11. Inspect the machine for any physical damage.
Ramp
Figure 2
Hold
Down
Bolts
Stabilizing
Blocks
Figure 3
Hold
Down
Bolts
7