Assembly & Set-Up; Tractor Set-Up - Cub Cadet LTX1046 Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Assembly & Set-Up
Contents of Crate
One Lawn Tractor
One Lawn Tractor Operator's Manual •

Tractor Set-Up

Moving The Tractor Manually
Your tractor's transmission is equipped with a hydrostatic
relief valve for occasions when it is necessary to move the
tractor manually. Opening this valve permits the fluid in the
transmission to bypass its normal route, allowing the rear tires
to "freewheel." To open the hydrostatic relief valve, proceed as
follows:
1.
Locate the hydrostatic bypass rod in the rear of the tractor.
See Figure 3-1.
Figure 3-1
2.
Pull the hydrostatic bypass rod outward, then down, to
lock it into place. The hydrostatic transmission is now in the
disengaged position.
NOTE: Bypass rods may vary by model, however the basic
operation is still the same. The bypass rod must be pulled
outward to allow the rear wheels to "freewheel."
On Some Tractors:
1.
Locate the hydrostatic bypass rod in the rear of the tractor.
See Figure 3-1.
2.
Pull the hydrostatic bypass rod outward until you feel it
"click" into the disengaged position.
One Oil Drain Tube
One Engine Operator's Manual
NOTE: The transmission will NOT engage when the hydrostatic
bypass rod is pulled out. Return the rod to its normal position
prior to operating the tractor.
Shipping Brace Removal
1.
Locate the shipping brace, if present, and warning tag
found on the right side of the cutting deck. See Figure 3-2.
2.
While holding the discharge chute with your left hand,
remove the shipping brace with your right hand by
grasping it between your thumb and index finger and
rotating it clockwise.
One Deck Wash Hose Coupler
CAUTION:
Never attempt to move the tractor
manually without first opening the hydrostatic relief
valve. Doing so will result in serious damage to the
tractor's transmission.
WARNING!
Make sure the lawn tractor's engine is
off, set the parking brake and remove the ignition
key before removing the shipping brace.
Figure 3-2
WARNING!
The shipping brace is used for
packaging purposes only. Remove and discard the
shipping brace before operating your lawn tractor.
WARNING!
The mowing deck is capable of
throwing objects. Failure to operate the riding
mower without the discharge cover in the proper
operating position could result in serious personal
injury and/or property damage.
3
9

Publicidad

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

Ltx1050Ltx1046kwLtx1050kw

Tabla de contenido