Locating And Protecting Your Balance - Adam Equipment HIGHLAND SERIE Manual Del Usuario

3.4

LOCATING AND PROTECTING YOUR BALANCE

In order to keep your balance functioning at its best we suggest that you do the
following:
© Adam Equipment Company 2014
Avoid extremes of temperature. Do not place in
direct sunlight or near air conditioning vents.
Make sure the balance is located on a strong table
and free from vibration.
Avoid unstable power sources. Do not use near large
users of electricity such as welding equipment or
large motors. Do not let the balance battery go flat –
if you are not using it for a long time you should
charge the battery up periodically to make sure the
battery does not lose its charge.
When you turn off the scale by pressing [ON/OFF]
key, the power is not completely isolated. You
should disconnect the power supply if it is not going
to be used for an extended period.
Keep free from vibration. Do not place near heavy or
vibrating machinery.
Avoid high humidity that might cause condensation.
Keep away from direct contact with water. Do not
spray or immerse the balance in water.
Protection Grade: IPX0
Do not place near open windows, air-conditioning
vents or fans that may cause a draft and unstable
readings.
Keep the balance clean. Do not stack material on the
balance / balance pan when it is not in use. The
Highland has a stacking feature for stacking more
than one unit on top of each other which does not
apply weight to the pan. For more details on this see
the section on storing.
6 9520revF-Jun14