Operation - ZUMEX SPEED Manual De Usuario

• To install the appliance, block the front wheels of the base stand using
the brake pedal to avoid the stand moving during installation. See detail
in Fig. 2 (see first page of the manual).
• Place the appliance over the base stand Fig. 2 (see first page of the
manual) lining up the inside corners of the machine with the two rubber
pegs on the stand, so that the holes in the fixing brackets coincide with
those in the machine. Now you can fix the machine in place using the
screws you removed and kept before.
• Fit the peel outlets, Fig. 2.
• Insert the juice tank sliding it along the guides to the end and fit the
stand's drip tray with its filter, as indicated in Fig. 3.
5. Plug the appliance into a standard earthed socket.
6. Make sure the front cover is fitted properly otherwise the safety
detectors will stop the appliance from working.
REMEMBER:
Use oranges up to 81 mm (we
recommend between 65 mm and 78
mm)
24

4.2 OPERATION

Operation of Models:
• Fill the feeder with oranges.
• Place a glass or jug under the juice outlet and press the green button located on the
left side of the appliance. The juicer will start to extract juice immediately. To stop the
juicer, press the red button.
Operation of Models:
• The digital models allow the user to program the number of oranges to be used when
the juicer starts to operate. The system can program up to 9 pieces. The quantity
programmed will be stored in the memory until a new program is saved.
• Programming:
Guide for the indicators on the digital display (Fig. 4):
1. Start button 5. Network connection indicator
2. One more piece 6. Disconnection push-button
3. Increase nº of pieces programmed 7. Connection push-button
4. Wrong placement of cover indicator 8. Partial counter (nº fruit programmed).
For continuous juicing. Set to «C»
Zumex Speed
Zumex Speed Tank Podium
Zumex Speed D
Zumex Speed D Tank Podium
9. Decrease nº of fruit programmed
10. Stop button
11. Totals counter
25
EN