Detecting Faults And Problems And Security Advices - ZUMEX SPEED Manual De Usuario

6. DETECTING FAULTS AND PROBLEMS AND SECURITY ADVICES

• FOR ALL MODELS
PROBLEM POSSIBLE CAUSE
The machine is not plugged in
No power is reaching the plug
Cover not properly fitted
The machine is not operating
Faulty safety detectors
Faulty ON/ OFF switch
Faulty circuit
The machine blocks frequently Insufficient voltage
during juicing
Faulty circuit
The pressing units are blocked Oranges are jammed
The pressing units are not
Internal fault
synchronised
Peel ejectors are incorrectly fitted
The peel ejectors break
The motor is running but the
Internal fault
pressing units are not turning
The tap gets blocked
Pips or excessive pulp in the fruit
(Zumex Speed Tank Podium &
Zumex Speed D Tank Podium)
Insufficient ventilation
The machine stops every so
often
Electricity overload
• ONLY FOR DIGITAL MODELS
PROBLEM POSSIBLE CAUSE
Light no. 5 does not turn on No power is reaching the plug
(see fig. 4)
Light no. 4 turns on (see fig. 4) Cover not properly fitted
IMPORTANT SAFETY PRECAUTIONS
Always unplug the machine before carrying out any procedures to remove obstructions.
To avoid accidents, do not manipulate this appliance to make it work without the cover safety
detectors.
The cover actions the safety detectors. The correct functioning of the safety detectors should
be tested from time to time. To do this, remove the cover, upon which the appliance should stop
working; if the appliance does not cut off upon removing the cover, contact the Technical Support
Service.
If the power cable is damaged, do not manipulate it, contact the Technical Support Service.
When moving the appliance and housing ensemble (Zumex Speed Tank Podium & Zumex Speed
D Tank Podium):
Unblock the front wheels of the housing.
Never push the appliance, always the housing. Never pull the appliance towards you.
32
SOLUTION
Plug it in
Check plug and socket
Ensure it is placed it correctly
Contact Technical Support Service
Contact Technical Support Service
Contact Technical Support Service
Check that the voltage matches that
indicated in the manual.
Contact Technical Support Service
Eliminate blockage
Contact Technical Support Service
Fit according to instruction manual (Fig. 6)
Contact Technical Support Service
Dismantle the top part of the tap and
clean (detail Fig 3.). Make sure that both
the juice tank filters are in place.
Check that the appliance's ventilation
grilles are not blocked.
Contact Technical Support Service
SOLUTION
Check that the appliance is properly
plugged in and if it still does not work,
contact Technical Support Service
Ensure it is placed correctly
ZUMEX, MÁQUINAS Y ELEMENTOS S.A.
Pgno. Inds Moncada II · c/ La Closa, 16
46113 Moncada, Valencia, España
Tfno: +34 961 301 251 · Fax: +34 961 301 255
www.zumex.com · zumex@zumex.com
EN
33