Technical Data - LORCH Handy 160 Control Pro Manual De Instrucciones

Technical data

Current [A]
20
20-100
100-200
>200
21 Technical data
Technical data*
Welding
Welding range TIG (I -I
2min
Welding range electrode (I
No load voltage max.
Current setting
Slope characteristic
ED 100% 40°C
ED 60% 40°C
ED max. current 40°C
Mains
Mains voltage (50/60Hz) 1~
Positive mains tolerance
Negative mains tolerance
Power consumption S (100%/40°C)
1
Power consumption S (60%/40°C)
1
Power consumption S (max.current)
1
Current consumption I (100%/40°C)
1
Current consumption I (60%/40°C)
1
Current consumption I (max.current)
1
Power factor (I )
2 max.
Max. permissible system impedance Zmax
in acc. with IEC 61000-3-11/-12
Mains fuse (slow-response)
Mains cable
Mains plug
Machine
Protection class
Insultation class
Cooling method
Noise emission
Dimensions and weights
Dimensions (LxBxH)
weight
*) measured at 40° C environmental temperature
05.11
Electrode angle
30°
60°-90°
90°-120°
120°
/U -U )
2 2min 2max
max
-I /U -U )
2min 2 2min 2max
max
Tungsten electrodes has to be ground always length-
wise, because the grinding marks crosswise cause a
nervous/flattering arc.The shape of the electrode for DC-
welding has to be sharp as a pencil. The angle of the
point depends on the welding current
It is enough when AC-welding to sharpen slightly edge
of the electrode. After a while a round form is shapened.
If the electrode tip is polluted due to dipping into the weld
pool or touching the filler wire, the respective part of the
electrode shall be completely ground off. Restore the
original, pointed shape. Grind in longitudinal direction.
Units Handy 160 ControlPro
A/V 5 - 160 / 10,2 - 16,4
A/V 5 - 150 / 20,2 - 26,0
V < 85
infinitely variable
falling
A 115
A 135
% 40
V 230
% +15
% -15
kVA 3,4
kVA 4,3
kVA 5,3
A 14,8
A 18,5
A 23,1
cos φ 0,99
mΩ 23
A 16
mm² 3 x 2,5
Schuko
IP 23
F
F
dB(A) <70
mm 337 x 130 x 211
kg 5,45
Handy 180
5 - 180 / 10,2 - 17,2
5 - 150 / 20,2 - 26,0
< 85
infinitely variable
falling
130
150
30
230
+15
-15
3,3
4,0
5,1
14,2
17,2
22,3
0,99
23
16
3 x 2,5
Schuko
23
F
F
<70
337 x 130 x 211
5,75
- 39 -