English; Introduction; Hardware Maintenance - Sunrise Medical JAY Fit Manual Del Usuario

E N G L I S H
SUNRISE LISTENS:
Thank you for choosing a JAY
your questions or comments about this manual, the safety
and reliability of your back system and the service you
receive from your Sunrise supplier.
Please feel free to write or call us at the address and
telephone number below:
Sunrise Medical
Thorns Road
Brierley Hill
West Midlands
DY5 2LD
Phone: 0845 605 66 88
Fax: 0845 605 66 89
www.SunriseMedical.co.uk
Be sure to maintain in a safe place all the instructions and
manuals you received with your back system. The contain
important user and safety information and should be
referred to often.
FOR ANSWERS TO YOUR QUESTIONS:
Your authorised supplier knows your back system best,
and can answer most of your questions about safety, use
and maintenance and important adjustments. For future
reference, fill in the following:
Supplier: ...........................................................................
Address: ............................................................................
...........................................................................................
Telephone: .......................................................................
Serial Number: .................................................................
Date of Purchase: ............................................................
Jay Fit Back
Fit Back. We want to hear
®
4

INTRODUCTION

WARNING!
READ BEFORE USE:
Failure to follow these recommendations and instructions
can cause equipment failures that result in serious injury.
CLINICAL CONSULTATION
Sunrise Medical recommends that a clinician, such as a
doctor or therapist, experienced in back and positioning be
consulted to determine if a Jay Fit Back is appropriate.
HARDWARE COMPATIBILITY
Jay Fit Backs are designed to be physically compatible
with most types of wheelchairs. Backs should only be
installed by an Authorised Sunrise Medical Supplier.
To determine hardware compatibility for a particular
wheelchair please follow the instructions in section II,
"Manual Wheelchair Back Cane Compatibility". Sunrise
Medical manufactures two styles of mounting hardware,
Standard and Quick-Mount. Standard hardware is
not recommended for reclining wheelchairs, standing
wheelchairs and wheelchairs that tilt in space beyond 30
degrees.

HARDWARE MAINTENANCE

Sunrise recommends that all fasteners on Jay Fit Backs
be checked for wear, such as loose bolts or broken
components every 6 months. Loose fasteners should
be re-tightened according to the installation instructions.
All fasteners should be tightened to 2.3 Nm (20 in.-
lbs.). Contact your authorised Sunrise Medical Supplier
immediately to replace any broken components. Do not
continue to use the back after identifying loose or broken
components.
MOTOR VEHICLE TRANSPORTATION
If you have any questions regarding these instructions
contact your Authorised Sunrise Medical Supplier or
Sunrise Medical directly.
I N T R O D U C T I O N
Rev.D