Technical Characteristics And Dimensions; Cleaning And Maintenance; Safety Standards; Maintenance-Cleaning Schedule - Vitrifrigo Trivalente Digit Serie Manual De Uso

6. TECHNICAL CHARACTERISTICS AND
OVERALL DIMENSIONS
The rating label shows the main technical data, while the dimensions
of the refrigerator and boxing are shown in Table 3.
7.

CLEANING AND MAINTENANCE

Safety Standards

R
All cleaning and maintenance must be carried out when
the refrigerator has been disconnected from all power
supplies.
R
All cleaning and maintenance must always be carried out
by previously trained personnel who have read and
understood all of the prescriptions for safety contained in
this manual and who aware of possible residual risks.
R
Always adhere to the time periods specified by the
manufacturer.
R
During all cleaning and maintenance operations, always
use individual protection devices (with CE marking) to
protect against possible injuries to hands
R
Do not use abrasive products, detergents or soap to
clean the appliance.
User, Maintenance and Installation Manual - Trivalenti
Maintenance – Cleaning Schedule
R
Any operations not included in Table 1 are to be
considered as repairs and for this reason, they must only
be carried out by qualified technical personnel.
R
It is obligatory to contact your retailer or the
manufacturer.
R
The maintenance operations listed here are to be
carried out periodically. The intervention times listed in
this manual are purely indicative and refer to normal
conditions of use. Take these times into account and if
necessary, carry out the recommended checks on a
more frequent basis.
Montly Maintenance Operations
Wash the outside of the refrigerator with lukewarm water, wipe over
EXTERNAL Cleaning with cold water and dry with a soft cloth. Do not use abrasive
products.
Remove the grids, containers, and ice trays. Clean the refrigerator with
a little bicarbonate of soda or vinegar diluted in lukewarm water.
INTERNAL Cleaning
Rinse and dry carefully with a soft cloth. Never use abrasive products,
detergents or soap.
Yearly Maintenance Operations
CONDENSER Cleaning Clean the condenser with a vacuum cleaner or a dry soft brush (Fig.9).
GAS PIPE Check Check the entire GAS supply pipe for cracks and/or leaks.
Check the integrity of the seal between the refrigerator and the
FIXING Check
compartment.
Maintenance Operations to carry out as required
Replace the GAS supply pipe before the expiry date printed on the
GAS PIPE Replacement
pipe.

Standby

At the end of the season and in the event that the refrigerator is to
remain idle for a long period, it is necessary to carry out the
following operations:
R
Position the switches "1""2" and "6" to the "O" position
and set the GAS knob "9" to the OFF position (Fig.3).
R
Close the central valve on the vehicle.
R
Empty the refrigerator completely.
R
Defrost the refrigerator and carry out general cleaning
operations.
R
Leave the freezer and refrigerator doors slightly open.
16
Tab. 1