REMIS REMIfront IV-M Instrucciones De Montaje página 18

C21
US/GB
C22
C23
Step 3: (Installing side system)
C24
C25
C26
C27
18/60
C21:
Screw the shields additionally in the middle to the head-
lining using the two Ø3,9x13mm screws.
C22:
Now screw the short tubes (807mm) to the tube holders
through the top holes of the plissée inside the A-pillar's
facing.
C23:
Connect the two tubes with the grub
NOTICE!!!
screw by pushing the free tube ends
onto it. To do so, carefully bend the
guiding tubes into the desired position. In case the tubes
are not in line with the shield, twist them out a bit off the
tube holder inside the A-column.
C24:
Place the side system into the designated position. Look for
the marked spots in the illustration for the screwing
positions of the side system.
C25-C27:
Pre-drill all designated screwing spots using a Ø2.5mm
drill: twice the plastic facing towards the armrest, twice
towards the top window frame of the door and twice the
plain surface of the car door.
Carefully push the guiding tubes
NOTICE!!!
aside, if necessary.