Changing The Rotor Blades - Carrera RC Nintendo Mini Mario-Copter Instrucciones De Montaje Y De Servicio

Auto Landing
15 You can trigger the automatic landing func-
tion at any time by means of pressing the
'Auto landing' button. The speed of the ro-
tors will reduce gradually as a result. You
are able to influence the landing position at
any time during the landing procedure by
means of moving the right-hand joystick.
The motor will switch itself off as soon as
the Quadrocopter is on the ground.
Auto-Start & Fly to 1 m
16 Press the 'Auto-start & fly to 1 m' button on the
controller, in order to start the motors and au-
tomatically fly up to the altitude of about 1 m.
You are able to influence the direction of
flight at any time during the starting opera-
tion by means of moving the right joystick.
The Quadrocopter will maintain itself in
position automatically as soon as the alti-
tude of about 1 m has been reached.
Trimming the Quadrocopter
Auto-trimming
17
1. Place the Quadrocopter on a hori-
zontal surface.
2. Link the Quadrocopter with the con-
troller as described in "Linking the
model with the controller".
3. Slide the gas lever and the lever for
forward / back simultaneously into
the right lower corner. The LED on the
Quadrocopter flashes on briefly and
then lights up continuously. The signal-
ling tone will sound once.
4. The neutral setting is completed.
18
When hovering, if the Quadrocopter flies
to the left or right without you moving the
lever for left / right movement, please pro-
ceed as follows: If the Quadrocopter
moves on its own fast or slow sideways to
the left, press the lower right trimmer for
right / left tilt in steps to the right. If the
Quadrocopter moves right, press the trim-
mer for right / left tilt in steps to the left.
19
When hovering, if the Quadrocopter flies
forwards or backwards without you mov-
ing the lever for forwards or backwards
movement, please proceed as follows: If
the Quadrocopter moves on its own fast or
slow forwards, press the upper right trim-
mer for forwards / backwards in steps
downwards. If the Quadrocopter moves
backwards, press the trimmer for forwards
/ backwards in steps upwards.
20 When hovering and without you moving
the lever for circling on the spot, if the
quadrocopter rotates to left or right, pro-
ceed as follows: If the Quadrocopter ro-
tates quickly or slowly to the left around its
own axis, press the trimmer for rotation
below left in steps to the right. If the Quad-
rocopter rotates to the right, press the
trimmer for rotation in steps to the left.

Changing the rotor blades

21 Use a smooth narrow object to help draw
off a rotor blade if necessary. Make sure
that you draw the rotor blade with great
care vertically upwards, and hold the mo-
tor from below to stabilise it.
WARNING!
22
Be sure to note the marking and colour,
also the tilt angle of the rotor blades!
Front left: red – marking "B"
Front right: red – marking "A"
Rear right: black – marking "B"
Rear left: black – marking "A"
23 QR code for motor-change system,
spare parts and further information.
21
ENGLISH