Data Transfer; Rs-232-C Interface - Fisher AVS 470 Manual De Instrucciones

50

4 Data transfer

4.1

RS-232-C Interface

The AVS 470 Viscosity Measuring Unit is equipped with one RS-232-C interface. In combination with an
optional data printer, for instance a TZ 3460, this interface is used to for documentation purposes.
Interface configuration:
The interface parameters can be changed. All transmission parameters are firmly set to the following default
values:
Parity:
Stop bits:
Data bits:
It is essential to set the printer to the same parameter settings. The optional TZ 3460 printer from Schott In-
struments is ex-works set to these parameters.
The other possible settings include:
Baud:
2400
4800
9600
i.e., the baud rate applicable to the respective parameter sets can be set independently; please refer to fig.
27 and 28.
Chapter 4 Data Transfer
none
1
8
RS-Parameter:
│
Bit:
│ 7
│ 8
│ 7
│ 8
│ 7
│ 8
Stopp: Parity:
2 No
1 No
1 Odd
1 Odd
1 Even
1 Even