Notes On Programming; Functional Description - Fisher AVS 470 Manual De Instrucciones

53
5.5

Notes on programming

Below you find a description of how to program the AVS 470 Viscosity Measuring Unit. In principle, the
settings are to be made as in the case of other automatic viscosity measurement devices and software
packages fro Schott Instruments. Users who are conversant with such devices will not encounter any
problems with the AVS 470 Viscosity Measuring Unit. Other users who are working for the first time with
devices of this kind should at first try out the various settings to gather some experience on their influence
on the measurements.
In the delivery state, all the settings are present in the form of so-called default or basic settings to which
they will also be restored in the case of a deletion of the memory contents.
In the operating mode used to create a method or to set the parameters of the ViscoPump or the system pa-
rameters, you can use the "Esc" key to return to the preceding screen.
5.6

Functional description

After power up, the following screen will appear
on the display:
Schott Instruments
Viscosystem AVS470
version: mmm dd yyyy
Viscosystem AVS470
ViscoPump Check:
system check: OK
press Enter
Viscosystem AVS470
ViscoPump Check:
system error
error removed?
Chapter 5 Working with the AVS 470 Viscosity Measuring Unit
text 1
Fig. 1 Power-up screen for 5-10 s
After the power-up screen has disappeared, either
of the two screens below may appear:
Fig. 2 System ok, press "Enter" to proceed to
Fig. 4
Fig. 3 System is not ok, please follow the error re-
moval instructions; as soon as everything is ok and
the elimination of the problem was confirmed, you
will be taken to Fig. 2. As long as the error persists,
you will be hold at Fig. 3