Miele STB 201 Instrucciones De Manejo página 64

en (USA) - Operation
Features of the Turbobrush
The Turbobrush is driven by the suction
power of the vacuum cleaner. The
brush roll rotation increases the intake
of threads, hair and lint. Four rollers
keeps the turbobrush 1.5 mm from the
floor.
Operation
The Turbobrush is intended for clea-
ning short-to-medium pile carpeting. It
can also be occasionally used on
smooth floor surfaces.
Read these Operating Instructions
carefully and completely before
using this appliance. Failure to do so
can result in property damage or
personal injury to you or others.
Do not use the Turbobrush on the
following surfaces:
– floor surfaces with a variable or un-
even profile. The brush might come
into contact with the floor and cause
damage.
– high quality, hand knotted rugs. For
example Berber or Persian rugs, as
well as wall-to-wall carpeting. The
threads may be pulled out of them.
64
Using the Turbobrush
^ To achieve the best results, slowly
pass the Turbobrush back and forth
over the carpet.
For carpets with fringes, always draw
the Turbobrush from the carpet across
the fringe towards the rest of the floor.