Intended Use - HammerSmith 231600 Instrucciones De Uso

INTENDED USE

The electric power tool is intended for marking, drilling, driving in screws and the undoing
of screws. The electric power tool's light is intended to illuminate the immediate working
area of the power tool and is not suitable for room illumination in the home.
ILLUSTRATED COMPONENTS
The numbering of the illustrated components refers to the representation of the electric
power tool on the opening pages.
Standard:
1. 1 Hammersmith Drill&Screw
2. 1 Charger
3. 1 Barrel with 8 bits (1 cross-bit 0, 1 cross-bit 1, 1 cross-bit 2, 1 cross-bit 3, 1 slot-bit
6mm, 1 slot-bit 4mm, 1 marking-bit, 1 drill-bit 3mm)
4. 1 Barrel with 8 bits (1 star-bit 10, 1 star-bit 15, 1 star-bit 20, 1 Allen 3, 1 Allen 4, 1 Allen
5, 1 marking-bit, 1 drill-bit 2.5 mm).
Professional:
1. 1 Hammersmith Drill&Screw
2. 1 Charger
3. 1 Barrel with 8 bits (1 cross-bit 0, 1 cross-bit 1, 1 cross-bit 2, 1 cross-bit 3, 1 slot-bit
6mm, 1 slot-bit 4mm, 1 marking-bit, 1 drill-bit 3mm)
4. 1 Barrel with 8 bits (1 star-bit 10, 1 star-bit 15, 1 star-bit 20, 1 Allen 3, 1 Allen 4, 1 Allen
5, 1 marking-bit, 1 drill-bit 2.5 mm)
5. 1 Angle attachment
6. 100 piece professional set
7. 1 Hard protective case
OPERATION
Battery Charging
Caution
: Only charge the battery with chargers recommended by the manufacturer.
There is a fire risk if a charger, which is suitable for a certain type of battery, is used with
other batteries.
20