Stihl SE 122 Manual De Instrucciones página 22

English
Do not use high-pressure cleaners to
clean the machine. The hard water jet
can damage parts of the machine.
Never spray the upper part of the
vacuum cleaner with water – Danger of
short-circuiting!
Accessories and Spare Parts
Only use parts or accessories which
have been approved by STIHL for this
machine or which are technically
equivalent. If you have any questions in
this respect, consult a servicing dealer.
Only use high-quality parts and
attachments. Otherwise, there may be a
risk of accidents and damage to the unit.
STIHL recommends the use of genuine
STIHL parts and accessories. They are
specifically designed to match your
model and meet your performance
requirements.
Do not modify the device – otherwise the
safety may be endangered. STIHL
excludes all liability for personal injury
and damage to property caused while
using unauthorized attachments.
Areas of application
The machine is suitable for commercial
use, e. g. in hotels, schools, hospitals,
industry, shops, offices, rental
businesses.
Vacuuming of dry, non-flammable
materials (dust, dirt, broken glass, wood
or metal shavings, sand, etc.) and non-
flammable liquids (dirty water, spilled
juices, etc.)
20
Never use the machine to
vacuum hot materials
(hot ash, flammable
explosive dust, glowing
cigarette butts, etc.) or
combustible liquids (gas -
oline, thinner, etc.) as
well as aggressive liquids
(acids, lye) – Danger of
fire or explosion!
The machine is not suitable for
vacuuming toxic dust.
Do not use the machine for any other
purpose because of the increased risk of
accidents and damage to the machine.
The machine must not be modified in
any way – this may also lead to
accidents or damage to the machine.
Transporting the Machine
When transporting the machine in or on
a vehicle, it must be secured, e.g. with
straps, so that it cannot slip or tip over.
Do not tilt the machine if there is liquid in
the container.
Close all latches on the container before
transport.
Before starting work
Checking the machine
It must be possible to move the
–
switch easily to the 0 position.
The switch must be in the 0
–
position.
Do not operate the machine if it is not
properly assembled and in good
condition – risk of accident!
The machine may only be used when all
parts are in perfect working order and
are securely mounted.
Remove the filter bag and check correct
operation of the float before vacuuming
liquids or wet materials. Never work
without the filter element.
Never attempt to modify the controls or
safety devices
Electrical connection
Minimize the risk of electrical shock:
Voltage and frequency of the
–
machine (see rating plate) must
match the voltage and frequency of
the mains supply
Examine the power cord, power
–
plug and extension cord for
damage. Damaged cords,
couplings and plugs or power cords
that do not comply with the
regulations must not be used
Only connect the machine to a
–
correctly installed power socket
Use only extension cords that
–
comply with the specifications for
the respective application.
The insulation on the power cord
–
and any extension cord, the plug
and the coupling must be fully intact
SE 122, SE 122 E