After Finishing Work; Emptying The Container - Stihl SE 122 Manual De Instrucciones

English

After Finishing Work

Empty the container and clean the
N
machine
After vacuuming liquids:
Remove the upper part of the
N
vacuum cleaner so that the filter
element can dry
Coil power cord around handle and
N
holder
Fasten the extension tube, suction
N
hose and accessories to the holders
provided for this purpose
The vacuum cleaner must be stored
N
in a dry room and protected against
unauthorized use
26

Emptying the container

2
1
Switch off the vacuum cleaner
N
Unplug the power plug from the
N
socket
Release the spring catches (1)
N
Lift the upper part of the vacuum
N
cleaner (2) vertically up and off
When dry-vacuuming without filter bag
and when wet-vacuuming
Empty the container and dispose of
N
its contents in accordance with the
applicable regulations
Continue with: Refit the upper part
N
of the vacuum cleaner
When dry-vacuuming with filter bag
1
1
Pull filter bag sleeve (1) off intake
N
port and seal opening in filter bag
sleeve with slide (2)
Carefully remove filter bag from
N
container and dispose of in
accordance with statutory
regulations
Insert new filter bag (3) (instructions
N
on filter bag)
Push filter bag sleeve onto intake
N
port as far as possible
Refit the upper part of the vacuum
cleaner
Clean the edge of the container
N
Refit the upper part of the vacuum
N
cleaner
Clean the sleeve and intake port
N
before fitting the suction hose
2
3
SE 122, SE 122 E